<?xml version="1.0" encoding="UTF-8"?>
<root>
  <posts>
    <post_id>127</post_id>
    <post_category_id>151</post_category_id>
    <post_title><![CDATA[Gimbal Shaft for Slag Car]]></post_title>
    <post_content_short><![CDATA[Due to the slag car frame being out of alignment following years of operation, the original gear coupling was working outside of recommended
operating angle parameters, therefore resulting in premature wear and component failure.]]></post_content_short>
    <post_icon>https://www.beattys.co.nz/media/website_posts/127/735fed_5bfd5e61cf094c038fdf4ff2b8e3515f~mv2.webp</post_icon>
    <post_content_type>page</post_content_type>
    <post_content_url>https://www.beattys.co.nz/projects/industrial/gimbal-shaft-for-slag-car/</post_content_url>
    <post_date>2025-11-19 01:27:45</post_date>
  </posts>
  <posts>
    <post_id>126</post_id>
    <post_category_id>151</post_category_id>
    <post_title><![CDATA[Cardan Shaft for Pressing Machine]]></post_title>
    <post_content_short><![CDATA[Following assembly of a new press machine, there were extended lead times for the OEM-supplied drive couplings and lack of technical
expertise and communication.]]></post_content_short>
    <post_icon>https://www.beattys.co.nz/media/website_posts/126/735fed_043dff2fa82a4fc5ab4b2e10ab279469~mv2-(1).webp</post_icon>
    <post_content_type>page</post_content_type>
    <post_content_url>https://www.beattys.co.nz/projects/industrial/cardan-shaft-for-pressing-machine/</post_content_url>
    <post_date>2025-11-19 00:58:34</post_date>
  </posts>
  <posts>
    <post_id>125</post_id>
    <post_category_id>151</post_category_id>
    <post_title><![CDATA[Oscillator Cardan Shaft]]></post_title>
    <post_content_short><![CDATA[NZ Steel was experiencing premature component failure and excessive corrosion from water and steam finding its way into the telescopic
sliding spline assembly.]]></post_content_short>
    <post_icon>https://www.beattys.co.nz/media/website_posts/125/735fed_5e6d6fa4327a454595369a9dc6dd1a27~mv2.webp</post_icon>
    <post_content_type>page</post_content_type>
    <post_content_url>https://www.beattys.co.nz/projects/industrial/oscillator-cardan-shaft/</post_content_url>
    <post_date>2025-11-19 00:57:45</post_date>
  </posts>
  <posts>
    <post_id>1</post_id>
    <post_category_id>37</post_category_id>
    <post_title><![CDATA[22.8m Catamaran]]></post_title>
    <post_content_short><![CDATA[The performance of this vessel has been nothing short of outstanding.]]></post_content_short>
    <post_icon>https://www.beattys.co.nz/media/website_posts/1/22.8m-Catamaran.png</post_icon>
    <post_content_type>page</post_content_type>
    <post_content_url>https://www.beattys.co.nz/projects/marine/228m-catamaran/</post_content_url>
    <post_date>2025-09-03 03:19:00</post_date>
  </posts>
  <posts>
    <post_id>22</post_id>
    <post_category_id>37</post_category_id>
    <post_title><![CDATA[30m Mussel Harvester]]></post_title>
    <post_content_short><![CDATA[Working with OceanTech to design and manufacture a heavy duty Turret marine driveline solution.]]></post_content_short>
    <post_icon>https://www.beattys.co.nz/media/website_posts/22/q-west.webp</post_icon>
    <post_content_type>page</post_content_type>
    <post_content_url>https://www.beattys.co.nz/projects/marine/30m-mussel-harvester-vanguard/</post_content_url>
    <post_date>2025-09-03 03:15:00</post_date>
  </posts>
  <posts>
    <post_id>123</post_id>
    <post_category_id>37</post_category_id>
    <post_title><![CDATA[10.2m Electric Catamaran]]></post_title>
    <post_content_short><![CDATA[Delivering a low noise compact driveline solution.]]></post_content_short>
    <post_icon>https://www.beattys.co.nz/media/website_posts/123/735fed_ee96d421aae74e2d97bf111d9d8dee71~mv2.webp</post_icon>
    <post_content_type>page</post_content_type>
    <post_content_url>https://www.beattys.co.nz/projects/marine/102m-electric-catamaran/</post_content_url>
    <post_date>2025-09-03 02:59:00</post_date>
  </posts>
  <posts>
    <post_id>2</post_id>
    <post_category_id>37</post_category_id>
    <post_title><![CDATA[17m Pilot Vessel]]></post_title>
    <post_content_short><![CDATA[Working with Pantocarene naval architects to design and manufacture a Turret marine cardan shaft.<br />]]></post_content_short>
    <post_icon>https://www.beattys.co.nz/media/website_posts/2/30m-Mussel-Harvester.png</post_icon>
    <post_content_type>page</post_content_type>
    <post_content_url>https://www.beattys.co.nz/projects/marine/30m-mussel-harvester/</post_content_url>
    <post_date>2025-09-03 02:45:00</post_date>
  </posts>
  <posts>
    <post_id>124</post_id>
    <post_category_id>37</post_category_id>
    <post_title><![CDATA[17m Patrol Vessel]]></post_title>
    <post_content_short><![CDATA[Designing and manufacturing to suit this commercial application vessel.]]></post_content_short>
    <post_icon>https://www.beattys.co.nz/media/website_posts/124/735fed_034d3994d11145398aebce980ecb63c1~mv2.webp</post_icon>
    <post_content_type>page</post_content_type>
    <post_content_url>https://www.beattys.co.nz/projects/marine/17m-patrol-vessel/</post_content_url>
    <post_date>2025-09-03 02:30:00</post_date>
  </posts>
</root>
